k210-sdk-stuff/doc/onboard.md
Wladimir J. van der Laan 8cc5ff53f5 rust: DVP
Add support for DVP peripheral.
2019-06-01 21:56:35 +00:00

43 lines
1.2 KiB
Markdown

Peripherals
===========
List of on-board peripherals and chips for the various boards with a K210.
Sipeed M1(w) module
-------------------
Also called "Dan" or "LicheeDan".
(source: https://www.twblogs.net/a/5bde1d0f2b717720b51b61a1)
- K210 - CPU
- GD25LQ128D - 128Mbit w25qxx Flash chip (seems hardwired on SPI3)
- RY1303 - 3 Channel 5.5V 2A 1.5MHz DC/DC Step down PMU
- PT8211 - DAC audio (I2S)
- CH340C - USB to serial chip CH340. used to flash firmware over USB connector and console access on boards except for the Maix Go
- MSM261S4030H0 - Microphone (I2S)
M1w only:
- Espressif ESP8285 - WiFi module (serial, connected to FPIOA pin 6/7/8), this is a ESP8266 with built-in 1M flash
Maix Go
-------
(source: schematic)
### On-board
- MSA300 - Accelerometer (I2C, address 0x26)
- STM32F103C8 - JTAG & UART, debug M1 without extra Jlink, this bypasses the CH340C on the module (USB to host, serial to K210)
- OV2640 - Color CMOS UXGA (2.0 MegaPixel) CAMERA C HI (DVP, SCCB address 0x60)
### External
(source: schematic)
- ST7789V - 240RGB x 320 dot 262K Color with Frame Memory Single-Chip TFT Controller/Driver (SPI)
- NS2009 - 4-Wire Touch Screen Controller (I2C, address 0x48)
- TF card slot (SPI)