andrey/k210-sdk-stuff
1
0
Fork 0
mirror of https://github.com/laanwj/k210-sdk-stuff.git synced 2024-11-23 01:46:19 +04:00
Code Issues Projects Releases Wiki Activity
3ff4933a88
k210-sdk-stuff/rust/uart-passthrough/README.md
Wladimir J. van der Laan 8ca44a288f Add demo for uart-passthrough
2019-05-21 17:10:51 +02:00

825 B
Raw Blame History

uart-passthrough

Pass through UART from host to the ESP8285 WIFI chip.

Any input from the host is forwarded to the ESP8285, and any input from the ESP8285 is forwarded to the host.

Allows setting the baudrate through an out-of-band protocol. Pulling DTR low will reset the baudrate to the safe default of 115200, accepting two commands:

0x23   <baudrate 32-bit LE>
  Set baudrate (both to host and ESP)

0x42
  Reset ESP8285 MCU (toggle WIFI_EN pin)

others: no op

The connection from the K210 to the ESP can handle up to 115200*40=4608000 baud, however the connection to the host seems to get stuck at a lower number. Use AT+UART_CUR= (not UART_DEF !) to set the baudrate at the ESP side so that it is always possible to reset the MCU to get back to 115200 baud.

There's a demo in demo/weather.py.