andrey/k210-sdk-stuff
1
0
Fork 0
mirror of https://github.com/laanwj/k210-sdk-stuff.git synced 2024-11-22 01:16:20 +04:00
Code Issues Projects Releases Wiki Activity
2840ec0cf9
k210-sdk-stuff/doc/onboard.md
Wladimir J. van der Laan 2840ec0cf9 doc: Add important note on I2C addresses
2019-08-18 11:32:53 +00:00

1.3 KiB
Raw Blame History

Peripherals

List of on-board peripherals and chips for the various boards with a K210.

Sipeed M1(w) module

Also called "Dan" or "LicheeDan".

(source: https://www.twblogs.net/a/5bde1d0f2b717720b51b61a1)

  • K210 - CPU
  • GD25LQ128D - 128Mbit w25qxx Flash chip (seems hardwired on SPI3)
  • RY1303 - 3 Channel 5.5V 2A 1.5MHz DC/DC Step down PMU
  • PT8211 - DAC audio (I2S)
  • CH340C - USB to serial chip CH340. used to flash firmware over USB connector and console access on boards except for the Maix Go
  • MSM261S4030H0 - Microphone (I2S)

M1w only:

  • Espressif ESP8285 - WiFi module (serial, connected to FPIOA pin 6/7/8), this is a ESP8266 with built-in 1M flash

Maix Go

(source: schematic)

On-board

  • MSA300 - Accelerometer (I2C, address 0x26*)
  • STM32F103C8 - JTAG & UART, debug M1 without extra Jlink, this bypasses the CH340C on the module (USB to host, serial to K210)
  • OV2640 - Color CMOS UXGA (2.0 MegaPixel) CAMERA C HI (DVP, SCCB address 0x60)

External

(source: schematic)

  • ST7789V - 240x320 262K Color Single-Chip TFT Controller/Driver with Frame Memory (SPI)
  • NS2009 - 4-Wire Touch Screen Controller (I2C, address 0x48*)
  • TF card slot (SPI)

* Note regarding I2C addresses: the I2C peripheral automatically adds a LSB for read/write to the address, so 0x26 is and 0x4c and 0x4d, and 0x48 is 0x90 and 0x91.