* neovim like scroll function
* clear line annotations outside of move_vertically/_visual
* add nvim scroll function to commands
* assign nvim-scroll to C-d and C-u (half page scrolls)
* dont remove backspace and space mapping
* move non-softwrap logic to seperate function, call this in nvim-scroll fn
* Revert "move non-softwrap logic to seperate function, call this in nvim-scroll fn"
This reverts commit e4905729c3.
* Revert "clear line annotations outside of move_vertically/_visual"
This reverts commit 1df3fefe55.
* add TODO for when inline diagnostics gets merged
* move nvim-scroll logic into scroll(), dont respect scrolloff
* run cargo fmt
* run cargo clippy
* update documenation for Ctrl-d and Ctrl-u remap
* Make sure pending key list is empty when count handling
This will allow using numbers as second key event.
* count handling; add an exception for 'g'
* Lookup the key event before considering a number as count
* Avoid the allocation of another vec for the pending keys
---------
Co-authored-by: x <x@torrent>
`syn_loader` was replaced rather than interior value being replace,
old value was still being referenced and not updated after `:config-refresh`.
By using `ArcSwap` like for `config`, each `.load()` call will return the most
updated value.
Co-authored-by: kyfan <kyfan@email>
* Replace FileType::Suffix with FileType::Glob
Suffix is rather limited and cannot be used to match files which have
semantic meaning based on location + file type (for example, Github
Action workflow files). This patch adds support for a Glob FileType to
replace Suffix, which encompasses the existing behavior & adds
additional file matching functionality.
Globs are standard Unix-style path globs, which are matched against the
absolute path of the file. If the configured glob for a language is a
relative glob (that is, it isn't an absolute path or already starts with
a glob pattern), a glob pattern will be prepended to allow matching
relative paths from any directory.
The order of file type matching is also updated to first match on globs
and then on extension. This is necessary as most cases where
glob-matching is useful will have already been matched by an extension
if glob matching is done last.
* Convert file-types suffixes to globs
* Use globs for filename matching
Trying to match the file-type raw strings against both filename and
extension leads to files with the same name as the extension having the
incorrect syntax.
* Match dockerfiles with suffixes
It's common practice to add a suffix to dockerfiles based on their
context, e.g. `Dockerfile.dev`, `Dockerfile.prod`, etc.
* Make env filetype matching more generic
Match on `.env` or any `.env.*` files.
* Update docs
* Use GlobSet to match all file type globs at once
* Update todo.txt glob patterns
* Consolidate language Configuration and Loader creation
This is a refactor that improves the error handling for creating
the `helix_core::syntax::Loader` from the default and user language
configuration.
* Fix integration tests
* Add additional starlark file-type glob
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Currently, helix implements operations which change the paths of files
incorrectly and inconsistently. This PR ensures that we do the following
whenever a buffer is renamed (`:move` and workspace edits)
* always send did_open/did_close notifications
* send will_rename/did_rename requests correctly
* send them to all LSP servers not just those that are active for a
buffer
* also send these requests for paths that are not yet open in a buffer (if
triggered from workspace edit).
* only send these if the server registered interests in the path
* autodetect language, indent, line ending, ..
This PR also centralizes the infrastructure for path setting and
therefore `:w <path>` benefits from similar fixed (but without didRename)
* injecting the icon through a resource file, no extra deps
* formatted
* scripted rc compilation
* formatted and restructured
* simplified conditional func call
We use `which::which` in many crates, so `which` was a separate
dependency across all of them. We can centralize `which` into the
stdx crate so it's easy for all crates to depend on it.
I also moved the rest of `helix-view/src/env.rs` into helix-stdx's
`env` module since it only contained a thin wrapper around `which`
and `std::env`.
helix-stdx is meant to carry extensions to the stdlib or low-level
dependencies that are useful in all other crates. This commit starts
with all of the path functions from helix-core and the CWD tracking that
lived in helix-loader.
The CWD tracking in helix-loader was previously unable to call the
canonicalization functions in helix-core. Switching to our custom
canonicalization code should make no noticeable difference though
since `std::env::current_dir` returns a canonicalized path with
symlinks resolved (at least on unix).
* feat(lsp): implement show document request
Implement [window.showDocument](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#window_showDocument)
LSP server-sent request.
This PR builds on top of helix-editor#5820,
moves the external-URL opening functionality into shared crate-level
function that returns a callback that is now used by both the
`open_file` command as well as the window.showDocument handler if
the URL is marked as external.
* add return
* use vertical split
* refactor
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Keep lsp event listener thread alive when malformed json is encountered from the lsp server
* Update unexpected error flow in recv() to close outstanding requests and close the language server
* Log malformed notifications as info instead of error
* Make close_language_server a nested function inside recv, similar to what's done in send
* Update malformed notification log text
* Clean up new log text a bit
* Initialize recv_buffer closer to where it's used
* Use "exit" instead of "close"
* Remove whitespace
* Remove the need for a helper method to exit the language server
* Match on Unhandled error explicitly and keep catch-all error case around
`:tree-sitter-subtree` could previously only print subtrees of nodes
in the root injection layer. We can improve on that by finding the layer
that contains the given byte range and printing the subtree within that
layer. That gives more useful results when a selection is within an
injection layer.
Make the pluralization of files and selections consistent to emphasize
the 1-to-1 relation between files and selections. The prior wording
with plural "files" and singular "selection" can mislead users into
thinking the command can open multiple files from a single selection.
Diagnostics are currently extended if text is inserted at their end. This is
desirable when inserting text after an identifier. For example consider:
let foo = 2;
--- unused variable
Renaming the identifier should extend the diagnostic:
let foobar = 2;
------ unused variable
This is currently implemented in helix but as a consequence adding whitespaces
or a type hint also extends the diagnostic:
let foo = 2;
-------- unused variable
let foo: Bar = 2;
-------- unused variable
In these cases the diagnostic should remain unchanged:
let foo = 2;
--- unused variable
let foo: Bar = 2;
--- unused variable
As a heuristic helix will now only extend diagnostics that end on a word char
if new chars are appended to the word (so not for punctuation/ whitespace).
The idea for this mapping was inspired for the word level tracking vscode uses
for many positions. While VSCode doesn't currently update diagnostics after
receiving publishDiagnostic it does use this system for inlay hints for example.
Similarly, the new association mechanism implemented here can be used for word
level tracking of inlay hints.
A similar mapping function is implemented for word starts. Together
these can be used to make a diagnostic stick to a word. If that word
is removed that diagnostic is automatically removed too. This is the exact
same behavior VSCode inlay hints eixibit.
* fix: #8977
fixes the issue that lines with only spaces are getting
joined as well
* reverting some renamings
* improve empty line check
* adding integration test
* reverting code block
* fix conditon check for line end
* applying suggested style
* rust-toolchain.toml: bump MSRV to 1.70.0
With Firefox 120 released on 21 November 2023, the MSRV is now 1.70.0.
* Fix cargo fmt with Rust 1.70.0
* Fix cargo clippy with Rust 1.70.0
* Fix cargo doc with Rust 1.70.0
* rust-toolchain.toml: add clippy component
* .github: bump dtolnay/rust-toolchain to 1.70
* helix-term: bump rust-version to 1.70
* helix-view/gutter: use checked_ilog10 to count digits
* helix-core/syntax: use MAIN_SEPARATOR_STR constant
* helix-view/handlers/dap: use Display impl for displaying process spawn error
* WIP: helix-term/commands: use checked math to assert ranges cannot overlap
* Resolve args.files before changing directory
* Removed the open_cwd work-around now that the path is full
* If -w is specified, use that as the working directory
* Open the remaining files in the argument list, also when the first is a directory
* Use an iterator access the files argument
* Add support for showing all LSPs in --health <lang>
* Add support for showing all LSPs in --health languages
* Use available/configured in --health languages
* Apply @AlexanderBrevig suggestion in --health
* Update `--health <language>`
Better output (inspired by #8156).
Handle the case where no LSPs are configured.
* Display all LSPs in `--health languages` instead of x/x
Displays all LSPs as a list in the table generated wih `--health languages`
* Make check_binary accept Optional references to str
Avoids some calls to .clone()
* Apply @the-mikedavis suggestions
* Avoid useless collecting and cloning
* Use for loop instead of .try_for_each()
* Accept +num flag for opening at line number
* Update +N argument feature according to feedback in original PR #5603
* Only override the line number of the first file if +N is specified
---------
Co-authored-by: Nachum Barcohen <38861757+nabaco@users.noreply.github.com>
* added working path arg to cli and help menu
* improve working path cli arg handling
* enable hx to set the working path
* applied cargo formatting
* improved code from cargo clippy suggestion
* improved code from follow up review
* fix for -w <path> is set but args.files is empty
* improved formatting of --help output
* adds treesitter-highlight-name command
* commit documentation changes
* moves the get_highlight_name function into core/syntax
* rename get_highlight_name function to get_highlight_for_node_at_position
* addresses pr comments: moves fn into helper fn, simplifies a lot
* commit updated documentation changes
* changes scope method to return &str so that callers can decide whether or not to own
* only stream from background thread if necessary
If the file transversal is longer shorter 30ms it will now be performed
on the main thread. Spawning a thread can take a while (or rather it
takes a while until that thread is scheduled) so the files can actually
take a while to show up. This prevents the `(running)` indicator from
briefly showing up when opening the file picker in a small directory.
* run partial cargo update
The completion component assumes that it operates on the same View but
it's possible to break this assumption by switching windows through
left-clicking. I believe we should clear the completion menu when
switching windows to fix this.
This change fixes a panic for this scenario:
* Open a buffer with LSP completion available
* Split the window (for example '<C-w>v')
* Enter insert mode and trigger the completion menu
* Select a completion candidate (for example with '<C-n>')
* Switch to the original window by left-clicking in its area
* Enter insert mode and make edits (for example 'o<backspace>')
This will trip the 'assert_eq' in Document::restore.
* transition to nucleo for fuzzy matching
* drop flakey test case
since the picker streams in results now any test that relies
on the picker containing results is potentially flakely
* use crates.io version of nucleo
* Fix typo in commands.rs
Co-authored-by: Skyler Hawthorne <skyler@dead10ck.com>
---------
Co-authored-by: Skyler Hawthorne <skyler@dead10ck.com>
* fix: line numbers remain relative when helix loses focus
If `line number = relative` and a new window is opened in helix, lines inside unfocused windows will be `absolute`. This commit adds the same thing when helix becomes unfocused in a terminal emulator.
* partial rebase
* create separate timer for redraw requests
* Update helix-view/src/editor.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
YAML indents queries are tweaked to fix auto indent behavior.
A new capture type `indent.always` is introduced to address use cases
where combining indent captures on a single line is desired.
Fixes#6661
* fix(picker): `alt-ret' changes cursor pos of current file, not new one
Closes#7673
* fix other pickers
* symbol pickers
* diagnostick pickers
This is done using the already patched `jump_to_location` method.
* fix global and jumplist pickers
* use `view` as old_id; make `align_view` method of `Action`
* test(picker): basic <alt-ret> functionality
* fix: picker integrational test
* fix nit
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The clipboard special registers are able to retain multiple selections
and also join the value when copying it to the clipboard. So by default
we should yank regularly to the '*' and '+' registers. That will have
the same behavior for the clipboards but will allow pasting multiple
selections if the clipboard doesn't change between yanks.
Since the clipboard provider now lives on the Registers type, we want
to eliminate it from the Editor. We can do that and clean up the
commands that interact with the clipboard by calling regular yank,
paste and replace impls on the clipboard special registers.
Eventually the clipboard commands could be removed once macro keybinding
is supported.
This fixes a discrepancy between regular registers which are used for
yanking multiple values (for example via `"ay`) and regular registers
that store a history of values (for example `"a*`).
Previously, the preview shown in `select_register`'s infobox would show
the oldest value in history. It's intuitive and useful to see the most
recent value pushed to the history though.
We cannot simply switch the preview line from `values.first()`
to `values.last()`: that would fix the preview for registers
used for history but break the preview for registers used to yank
multiple values. We could push to the beginning of the values with
`Registers::push` but this is wasteful from a performance perspective.
Instead we can have `Registers::read` return an iterator that
returns elements in the reverse order and reverse the values in
`Register::write`. This effectively means that `push` adds elements to
the beginning of the register's values. For the sake of the preview, we
can switch to `values.last()` and that is then correct for both usage-
styles. This also needs a change to call-sites that read the latest
history value to switch from `last` to `first`.
This is an unfortunately noisy change: we need to update virtually all
callsites that access the registers. For reads this means passing in the
Editor and for writes this means handling potential failure when we
can't write to a clipboard register.
This removes a handful of allocations for functions calling into the
function, which is nice because the prompt may call this function on
every keypress.
Pascal and I discussed this and we think it's generally better to
take a 'RopeSlice' rather than a '&Rope'. The code block rendering
function in the markdown component module is a good example for how
this can be useful: we can remove an allocation of a rope and instead
directly turn a '&str' into a 'RopeSlice' which is very cheap.
A change to prefer 'RopeSlice' to '&Rope' whenever the rope isn't
modified would be nice, but it would be a very large diff (around 500+
500-). Starting off with just the syntax functions seems like a nice
middle-ground, and we can remove a Rope allocation because of it.
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
Since regex is almost always injected into other languages,
`pattern_character`s will inherit the highlight for the structure that
injects them (for example `/foo/` in JavaScript or `~r/foo/` in Elixir).
This removes the string highlight when used in the prompt.
We also add `ERROR` node highlighting so that errors in regex syntax
appear in the prompt. This resolves a TODO in the `regex_prompt`
function about highlighting errors in the regex.
We can use tree-sitter-regex highlighting in prompts for entering
regexes, like `search` or `global_search`. The `highlighted_code_block`
function from the markdown component makes this a very small change.
This could be improved in the future by leaving the parsed syntax tree
on the prompt, allowing incremental updates. Prompt lines are usually so
short though and tree-sitter-regex is rather small and uncomplicated,
so that improvement probably wouldn't make a big difference.
* Add initial support for LSP DidChangeWatchedFiles
* Move file event Handler to helix-lsp
* Simplify file event handling
* Refactor file event handling
* Block on future within LSP file event handler
* Fully qualify uses of the file_event::Handler type
* Rename ops field to options
* Revert newline removal from helix-view/Cargo.toml
* Ensure file event Handler is cleaned up when lsp client is shutdown
* _apply_motion generalization where possible
API encourages users to not forget setting `editor.last_motion` when
applying a motion. But also not setting `last_motion` without applying a
motion first.
* (rename) will_find_char -> find_char
method name makes it sound like it would be returning a boolean.
* use _apply_motion in find_char
Feature that falls out from this is that repetitions of t,T,f,F are
saved with the context extention/move and count. (Not defaulting to extend
by 1 count).
* Finalize apply_motion API
last_motion is now a private field and can only be set by calling
Editor.apply_motion(). Removing need (and possibility) of writing:
`motion(editor); editor.last_motion = motion`
Now it's just: `editor.apply_motion(motion)`
* editor.last_message: rm Box wrap around Arc
* Use pre-existing `Direction` rather than custom `SearchDirection`.
* `LastMotion` type alias for `Option<Arc<dyn Fn(&mut Editor)>>`
* Take motion rather than cloning it.
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* last_motion as Option<Motion>.
* Use `Box` over `Arc` for `last_motion`.
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The spec explicitly disallows publishDiagnostic to be sent before
the initialize response:
> ... the server is not allowed to send any requests or notifications to
> the client until it has responded with an InitializeResult ...
(https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#initialize)
But if a non-compliant server sends this we currently panic because we
'.expect()' the server capabilities to be known to fetch the position
encoding. Instead of panicking we can discard the notification and log
the non-compliant behavior.
Merges the code for the Picker and FilePicker into a single Picker that
can show a file preview if a preview callback is provided. This change
was mainly made to facilitate refactoring out a simple skeleton of a
picker that does not do any filtering to be reused in a normal Picker
and a DynamicPicker (see #5714; in particular [mikes-comment] and
[gokuls-comment]).
The crux of the issue is that a picker maintains a list of predefined
options (eg. list of files in the directory) and (re-)filters them every
time the picker prompt changes, while a dynamic picker (eg. interactive
global search, #4687) recalculates the full list of options on every
prompt change. Using a filtering picker to drive a dynamic picker hence
does duplicate work of filtering thousands of matches for no reason. It
could also cause problems like interfering with the regex pattern in the
global search.
I tried to directly extract a PickerBase to be reused in Picker and
FilePicker and DynamicPicker, but the problem is that DynamicPicker is
actually a DynamicFilePicker (i.e. it can preview file contents) which
means we would need PickerBase, Picker, FilePicker, DynamicPicker and
DynamicFilePicker and then another way of sharing the previewing code
between a FilePicker and a DynamicFilePicker. By merging Picker and
FilePicker into Picker, we only need PickerBase, Picker and
DynamicPicker.
[gokuls-comment]: https://github.com/helix-editor/helix/issues/5714#issuecomment-1410949578
[mikes-comment]: https://github.com/helix-editor/helix/issues/5714#issuecomment-1407451963
Resolves issue #6888 by adding a command to join all selections and yank
them to the specified register. The typed command takes an argument as
the separator to use when joining the selections.
Previously a count or register selection would be lost while opening
the command palette. This change allows using a register selection or
count in any command chosen from the command palette.
Previously the register selection (via `"`) would be lost in the middle
of any key sequence longer than one key. For example, `<space>f` would
clear the register selection after the `<space>` making it inaccessible
for the `file_picker` command.
This behavior does not currently have any effect in the default keymap
but might affect custom keymaps. This change aligns the behavior of the
register with count. Making this change allows propagating the register
to the `command_palette` (see the child commit) or other pickers should
we decide to use registers in those in the future. (Interactive global
search for example.)
Does not change any behavior other than making the tuple slightly
more idiomatic. Keymap infobox shows key events, then the respective
description. This commit makes sure that order is used from the get go,
rather than flipping it midway.
* chore: avoid format! call with argument when useless
* feat: also clear diagnostics for unopened documents when exiting an LSP
* feat: we already worked on `self.editor.diagnostics` no need to redo the checks
* Add command for merging non-consecutive ranges
* Add `merge_selections` command to book
* Simplify `merge_ranges`
Heeded the advice of @the-mikedavis to stop iterating over all ranges and simply merge the first and the last range, as the invariants of `Selection` guarantee that the list of ranges is always sorted and never empty.
* Clarify doc comment of `merge_ranges`
* Add `helix_lsp::client::Client::supports_feature(&self, LanguageServerFeature)`
* Extend `doc.language_servers_with_feature` to use this method as filter as well
* Add macro `language_server_with_feature!` to reduce boilerplate for non-mergeable language server requests (like goto-definition)
* Refactored most of the `find_map` code to use the either the macro or filter directly via `doc.language_servers_with_feature`
Language Servers are now configured in a separate table in `languages.toml`:
```toml
[langauge-server.mylang-lsp]
command = "mylang-lsp"
args = ["--stdio"]
config = { provideFormatter = true }
[language-server.efm-lsp-prettier]
command = "efm-langserver"
[language-server.efm-lsp-prettier.config]
documentFormatting = true
languages = { typescript = [ { formatCommand ="prettier --stdin-filepath ${INPUT}", formatStdin = true } ] }
```
The language server for a language is configured like this (`typescript-language-server` is configured by default):
```toml
[[language]]
name = "typescript"
language-servers = [ { name = "efm-lsp-prettier", only-features = [ "format" ] }, "typescript-language-server" ]
```
or equivalent:
```toml
[[language]]
name = "typescript"
language-servers = [ { name = "typescript-language-server", except-features = [ "format" ] }, "efm-lsp-prettier" ]
```
Each requested LSP feature is priorized in the order of the `language-servers` array.
For example the first `goto-definition` supported language server (in this case `typescript-language-server`) will be taken for the relevant LSP request (command `goto_definition`).
If no `except-features` or `only-features` is given all features for the language server are enabled, as long as the language server supports these. If it doesn't the next language server which supports the feature is tried.
The list of supported features are:
- `format`
- `goto-definition`
- `goto-declaration`
- `goto-type-definition`
- `goto-reference`
- `goto-implementation`
- `signature-help`
- `hover`
- `document-highlight`
- `completion`
- `code-action`
- `workspace-command`
- `document-symbols`
- `workspace-symbols`
- `diagnostics`
- `rename-symbol`
- `inlay-hints`
Another side-effect/difference that comes with this PR, is that only one language server instance is started if different languages use the same language server.
There was an issue with autocompletion of a path with a space in it.
Before:
:o test\ dir -> <TAB> -> test\ dirfile1
After:
:o test\ dir -> <TAB> -> test\ dir\file1
Currently, when forward deleting (`delete_char_forward` bound to `del`,
`delete_word_forward`, `kill_to_line_end`) the cursor is moved to the
left in append mode (or generally when the cursor is at the end of the
selection). For example in a document `|abc|def` (|indicates selection)
if enter append mode the cursor is moved to `c` and the selection
becomes: `|abcd|ef`. When deleting forward (`del`) `d` is deleted. The
expectation would be that the selection doesn't shrink so that `del`
again deletes `e` and then `f`. This would look as follows:
`|abcd|ef`
`|abce|f`
`|abcf|`
`|abc |`
This is inline with how other editors like kakoune work.
However, helix currently moves the selection backwards leading to the
following behavior:
`|abcd|ef`
`|abc|ef`
`|ab|ef`
`ef`
This means that `delete_char_forward` essentially acts like
`delete_char_backward` after deleting the first character in append
mode.
To fix the problem the cursor must be moved to the right while deleting
forward (first fix in this commit). Furthermore, when the EOF char is
reached a newline char must be inserted (just like when entering
appendmode) to prevent the cursor from moving to the right
Some deletion operations (especially those that use indentation)
can generate overlapping deletion ranges when using multiple cursors.
To fix that problem a new `Transaction::delete` and
`Transaction:delete_by_selection` function were added. These functions
merge overlapping deletion ranges instead of generating an invalid
transaction. This merging of changes is only possible for deletions
and not for other changes and therefore require its own function.
The function has been used in all commands that currently delete
text by using `Transaction::change_by_selection`.
When re requesting a completion that already has a selected item we
reuse that selections savepoint. However, the selection has likely
changed since that savepoint which requires us to use the selection
from that savepoint
