diff --git a/doc/k210.dtsi b/doc/k210.dtsi
new file mode 100644
index 0000000..8b3b872
--- /dev/null
+++ b/doc/k210.dtsi
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ */
+
+#include <dt-bindings/clock/k210-sysctl.h>
+#include <dt-bindings/mfd/k210-sysctl.h>
+#include <dt-bindings/reset/k210-sysctl.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1_0;
+		serial0 = &uarths0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+	};
+
+	clocks {
+		in0: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			reg = <0>;
+			riscv,isa = "rv64imafdgc";
+			mmu-type = "sv39";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			clocks = <&sysclk K210_CLK_CPU>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			reg = <1>;
+			riscv,isa = "rv64imafdgc";
+			mmu-type = "sv39";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			clocks = <&sysclk K210_CLK_CPU>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram0: memory@80000000 {
+		device_type = "memory";
+		compatible = "kendryte,k210-sram";
+		reg = <0x80000000 0x400000>;
+		clocks = <&sysclk K210_CLK_SRAM0>;
+	};
+
+	sram1: memory@80400000 {
+		device_type = "memory";
+		reg = <0x80400000 0x200000>;
+		compatible = "kendryte,k210-sram";
+		clocks = <&sysclk K210_CLK_SRAM1>;
+	};
+
+	airam: memory@80600000 {
+		device_type = "memory";
+		reg = <0x80600000 0x200000>;
+		compatible = "kendryte,k210-airam";
+		clocks = <&sysclk K210_CLK_PLL1>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ai_reserved: ai@80600000 {
+			reg = <0x80600000 0x200000>;
+			reusable;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		debug0: debug@0 {
+			compatible = "kendryte,k210-debug", "riscv,debug";
+			reg = <0x0 0x1000>;
+		};
+
+		rom0: nvmem@1000 {
+			reg = <0x1000 0x1000>;
+			read-only;
+		};
+
+		clint0: interrupt-controller@2000000 {
+			#interrupt-cells = <1>;
+			compatible = "kendryte,k210-clint", "riscv,clint0";
+			reg = <0x2000000 0x1000>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
+			clocks = <&sysclk K210_CLK_CPU>;
+		};
+
+		plic0: interrupt-controller@C000000 {
+			#interrupt-cells = <1>;
+			compatible = "kendryte,k210-plic", "riscv,plic0";
+			reg = <0xC000000 0x4000000>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 9>, <&cpu0_intc 11>,
+					      <&cpu1_intc 9>, <&cpu1_intc 11>;
+			riscv,ndev = <65>;
+			riscv,max-priority = <7>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "kendryte,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysclk K210_CLK_CPU>;
+			status = "disabled";
+		};
+
+		gpio0: gpio-controller@38001000 {
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+			compatible = "kendryte,k210-gpiohs", "sifive,gpio0";
+			reg = <0x38001000 0x1000>;
+			interrupt-controller;
+			interrupts = <34 35 36 37 38 39 40 41
+				      42 43 44 45 46 47 48 49
+				      50 51 52 53 54 55 56 57
+				      58 59 60 61 62 63 64 65>;
+			gpio-controller;
+			ngpios = <32>;
+			status = "disabled";
+		};
+
+		kpu0: ai@40800000 {
+			compatible = "kendryte,k210-ai";
+			reg = <0x40800000 0xc00000>;
+			interrupts = <25>;
+			clocks = <&sysclk K210_CLK_AI>;
+			memory-region = <&ai_reserved>;
+			status = "disabled";
+		};
+
+		fft0: fft@42000000 {
+			compatible = "kendryte,k210-fft";
+			reg = <0x42000000 0x400000>;
+			interrupts = <26>;
+			clocks = <&sysclk K210_CLK_FFT>;
+			resets = <&sysrst K210_RST_FFT>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@50000000 {
+			compatible = "kendryte,k210-dmac", "snps,axi-dma-1.01a";
+			reg = <0x50000000 0x1000>;
+			interrupts = <27 28 29 30 31 32>;
+			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&sysrst K210_RST_DMA>;
+			dma-channels = <6>;
+			snps,dma-masters = <2>;
+			snps,data-width = <5>;
+			snps,block-size = <0x400000 0x400000 0x400000
+					   0x400000 0x400000 0x400000>;
+			snps,axi-max-burst-len = <256>;
+			status = "disabled";
+		};
+
+		apb0: bus@50200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "kendryte,k210-apb", "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB0>;
+
+			gpio1: gpio-controller@50200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "kendryte,k210-gpio",
+					     "snps,dw-apb-gpio";
+				reg = <0x50200000 0x80>;
+				clocks = <&sysclk K210_CLK_GPIO>;
+				resets = <&sysrst K210_RST_GPIO>;
+				status = "disabled";
+
+				gpio1_0: gpio1@0 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "snps,dw-apb-gpio-port";
+					reg = <0>;
+					interrupt-controller;
+					interrupts = <23>;
+					gpio-controller;
+					snps,nr-gpios = <8>;
+				};
+			};
+
+			uart1: serial@50210000 {
+				compatible = "kendryte,k210-uart",
+					     "snps,dw-apb-uart";
+				reg = <0x50210000 0x100>;
+				interrupts = <11>;
+				clocks = <&sysclk K210_CLK_UART1>;
+				resets = <&sysrst K210_RST_UART1>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+				status = "disabled";
+			};
+
+			uart2: serial@50220000 {
+				compatible = "kendryte,k210-uart",
+					     "snps,dw-apb-uart";
+				reg = <0x50220000 0x100>;
+				interrupts = <12>;
+				clocks = <&sysclk K210_CLK_UART2>;
+				resets = <&sysrst K210_RST_UART2>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+				status = "disabled";
+			};
+
+			uart3: serial@50230000 {
+				compatible = "kendryte,k210-uart",
+					     "snps,dw-apb-uart";
+				reg = <0x50230000 0x100>;
+				interrupts = <13>;
+				clocks = <&sysclk K210_CLK_UART3>;
+				resets = <&sysrst K210_RST_UART3>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+				status = "disabled";
+			};
+
+			spi2: spi@50240000 {
+				compatible = "kendryte,k120-spislave",
+					     "snps,dw-apb-ssi";
+				spi-slave;
+				reg = <0x50240000 0x100>;
+				interrupts = <2>;
+				clocks = <&sysclk K210_CLK_SPI2>;
+				resets = <&sysrst K210_RST_SPI2>;
+				spi-max-frequency = <25000000>;
+				/*
+				 * Likely not the only offset change, but this
+				 * is the only one which is documented.
+				 */
+				snps,tmod-offset = <8>;
+				status = "disabled";
+			};
+
+			i2s0: i2s@50250000 {
+				compatible = "kendryte,k210-i2s",
+					     "snps,designware-i2s";
+				reg = <0x50250000 0x200>;
+				interrupts = <5>;
+				clocks = <&sysclk K210_CLK_I2S0>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S0>;
+				status = "disabled";
+			};
+
+			apu0: sound@520250200 {
+				compatible = "kendryte,k210-apu";
+				reg = <0x50250200 0x200>;
+				status = "disabled";
+			};
+
+			i2s1: i2s@50260000 {
+				compatible = "kendryte,k210-i2s",
+					     "snps,designware-i2s";
+				reg = <0x50260000 0x200>;
+				interrupts = <6>;
+				clocks = <&sysclk K210_CLK_I2S1>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S1>;
+				status = "disabled";
+			};
+
+			i2s2: i2s@50270000 {
+				compatible = "kendryte,k210-i2s",
+					     "snps,designware-i2s";
+				reg = <0x50270000 0x200>;
+				interrupts = <7>;
+				clocks = <&sysclk K210_CLK_I2S2>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@50280000 {
+				compatible = "kendryte,k210-i2c",
+					     "snps,designware-i2c";
+				reg = <0x50280000 0x100>;
+				interrupts = <8>;
+				clocks = <&sysclk K210_CLK_I2C0>;
+				resets = <&sysrst K210_RST_I2C0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@50290000 {
+				compatible = "kendryte,k210-i2c",
+					     "snps,designware-i2c";
+				reg = <0x50290000 0x100>;
+				interrupts = <9>;
+				clocks = <&sysclk K210_CLK_I2C1>;
+				resets = <&sysrst K210_RST_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@502A0000 {
+				compatible = "kendryte,k210-i2c",
+					     "snps,designware-i2c";
+				reg = <0x502A0000 0x100>;
+				interrupts = <10>;
+				clocks = <&sysclk K210_CLK_I2C2>;
+				resets = <&sysrst K210_RST_I2C2>;
+				status = "disabled";
+			};
+
+			fpioa: pinmux@502B0000 {
+				compatible = "kendryte,k210-fpioa";
+				reg = <0x502B0000 0x100>;
+				clocks = <&sysclk K210_CLK_FPIOA>;
+				resets = <&sysrst K210_RST_FPIOA>;
+				status = "disabled";
+			};
+
+			sha256: sha256@502C0000 {
+				compatible = "kendryte,k210-sha256";
+				reg = <0x502C0000 0x100>;
+				clocks = <&sysclk K210_CLK_SHA>;
+				resets = <&sysrst K210_RST_SHA>;
+				status = "disabled";
+			};
+
+			timer0: timer@502D0000 {
+				compatible = "kendryte,k210-timer",
+					     "snps,dw-apb-timer";
+				reg = <0x502D0000 0x100>;
+				interrupts = <14 15>;
+				clocks = <&sysclk K210_CLK_TIMER0>;
+				clock-names = "timer";
+				resets = <&sysrst K210_RST_TIMER0>;
+				status = "disabled";
+			};
+
+			timer1: timer@502E0000 {
+				compatible = "kendryte,k210-timer",
+					     "snps,dw-apb-timer";
+				reg = <0x502E0000 0x100>;
+				interrupts = <16 17>;
+				clocks = <&sysclk K210_CLK_TIMER1>;
+				clock-names = "timer";
+				resets = <&sysrst K210_RST_TIMER1>;
+				status = "disabled";
+			};
+
+			timer2: timer@502F0000 {
+				compatible = "kendryte,k210-timer",
+					     "snps,dw-apb-timer";
+				reg = <0x502F0000 0x100>;
+				interrupts = <18 19>;
+				clocks = <&sysclk K210_CLK_TIMER2>;
+				clock-names = "timer";
+				resets = <&sysrst K210_RST_TIMER2>;
+				status = "disabled";
+			};
+		};
+
+		apb1: bus@50400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "kendryte,k210-apb", "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB1>;
+
+			wdt0: watchdog@50400000 {
+				compatible = "kendryte,k210-wdt", "snps,dw-wdt";
+				reg = <0x50400000 0x100>;
+				interrupts = <21>;
+				clocks = <&sysclk K210_CLK_WDT0>;
+				resets = <&sysrst K210_RST_WDT0>;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@50410000 {
+				compatible = "kendryte,k210-wdt", "snps,dw-wdt";
+				reg = <0x50410000 0x100>;
+				interrupts = <22>;
+				clocks = <&sysclk K210_CLK_WDT1>;
+				resets = <&sysrst K210_RST_WDT1>;
+				status = "disabled";
+			};
+
+			otp0: nvmem@50420000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "kendryte,k210-otp";
+				reg = <0x50420000 0x100>,
+				      <0x88000000 0x20000>;
+				reg-names = "reg", "mem";
+				clocks = <&sysclk K210_CLK_ROM>;
+				resets = <&sysrst K210_RST_ROM>;
+				read-only;
+				status = "disabled";
+
+				/* Bootloader */
+				firmware@00000 {
+					reg = <0x00000 0xC200>;
+				};
+
+				/*
+				 * config string as described in RISC-V
+				 * privileged spec 1.9
+				 */
+				config-1-9@1c000 {
+					reg = <0x1C000 0x1000>;
+				};
+
+				/*
+				 * Device tree containing only registers,
+				 * interrupts, and cpus
+				 */
+				fdt@1d000 {
+					reg = <0x1D000 0x2000>;
+				};
+
+				/* CPU/ROM credits */
+				credits@1f000 {
+					reg = <0x1F000 0x1000>;
+				};
+			};
+
+			dvp0: camera@50430000 {
+				compatible = "kendryte,k210-dvp";
+				reg = <0x50430000 0x100>;
+				interrupts = <24>;
+				clocks = <&sysclk K210_CLK_DVP>;
+				resets = <&sysrst K210_RST_DVP>;
+				status = "disabled";
+			};
+
+			sysctl: syscon@50440000 {
+				compatible = "kendryte,k210-sysctl",
+					     "syscon", "simple-mfd";
+				reg = <0x50440000 0x100>;
+				reg-io-width = <4>;
+
+				sysclk: clock-controller {
+					#clock-cells = <1>;
+					compatible = "kendryte,k210-clk";
+					clocks = <&in0>;
+				};
+
+				sysrst: reset-controller {
+					compatible = "kendryte,k210-rst",
+						     "syscon-reset";
+					#reset-cells = <1>;
+					regmap = <&sysctl>;
+					offset = <K210_SYSCTL_PERI_RESET>;
+					mask = <0x27FFFFFF>;
+					assert-high = <1>;
+				};
+
+				reboot {
+					compatible = "syscon-reboot";
+					regmap = <&sysctl>;
+					offset = <K210_SYSCTL_SOFT_RESET>;
+					mask = <1>;
+					value = <1>;
+				};
+			};
+
+			aes0: aes@50450000 {
+				compatible = "kendryte,k210-aes";
+				reg = <0x50450000 0x100>;
+				clocks = <&sysclk K210_CLK_AES>;
+				resets = <&sysrst K210_RST_AES>;
+				status = "disabled";
+			};
+
+			rtc: rtc@50460000 {
+				compatible = "kendryte,k210-rtc";
+				reg = <0x50460000 0x100>;
+				clocks = <&in0>;
+				resets = <&sysrst K210_RST_RTC>;
+				interrupts = <20>;
+				status = "disabled";
+			};
+		};
+
+		apb2: bus@52000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "kendryte,k210-apb", "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB2>;
+
+			spi0: spi@52000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "kendryte,k210-spi",
+					     "snps,dw-apb-ssi";
+				reg = <0x52000000 0x100>;
+				interrupts = <1>;
+				clocks = <&sysclk K210_CLK_SPI0>;
+				clock-names = "ssi_clk";
+				resets = <&sysrst K210_RST_SPI0>;
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			spi1: spi@53000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "kendryte,k210-spi",
+					     "snps,dw-apb-ssi";
+				reg = <0x53000000 0x100>;
+				interrupts = <2>;
+				clocks = <&sysclk K210_CLK_SPI1>;
+				clock-names = "ssi_clk";
+				resets = <&sysrst K210_RST_SPI1>;
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			spi3: spi@54000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "kendryte,k210-spi",
+					     "snps,dw-apb-ssi";
+				reg = <0x54000000 0x200>;
+				interrupts = <4>;
+				clocks = <&sysclk K210_CLK_SPI3>;
+				clock-names = "ssi_clk";
+				resets = <&sysrst K210_RST_SPI3>;
+				/* Could possibly go up to 200 MHz */
+				spi-max-frequency = <100000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};