The current implementation didn't reload the theme if no no theme was
explicitly configured (so the default theme was used). This commit
brings `refresh_theme` in line with the initialization code.
Add new theme highlight keys, for setting the colour of the breakpoint
character and the current line at which execution has been paused at.
The two new keys are `ui.highlight.frameline` and `ui.debug.breakpoint`.
Highlight according to those keys, both the line at which debugging
is paused at and the breakpoint indicator.
Add an indicator for the current line at which execution is paused
at, themed by the `ui.debug.active` theme scope. Update various themes
to showcase how the new functionality works.
Better icons are dependent on #2869, and as such will be handled in the
future, once it lands.
Closes: #5952
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
While scrolling (with the `scroll`) command scrolloff was calculated
slightly differently than in `ensure_cursor_in_view` which could cause
the cursor to get stuck while scrolling
Virtual text lines (either caused by softwrapped inlay hints that take
multiple or line annotations) currently block scrolling downwards.
if the visual offset passed to char_idx_at_visual_offset or
visual_offset_from_block is within a virtual text line then the char
position before the virtual text and a visual offset are returned.
We previously ignored that visual offset and as a result the cursor
would be stuck at the start of the virtual text. This commit fixes
that by simply moving the cursor to the next char (so past the virtual
text) if this visual offset is non-zero
The current test DSL currently has no way to express being at the end of
a line, save for putting an explicit LF or CRLF inside the `#[|]#`. The
problem with this approach is that it can add unintended extra new lines
if used in conjunction with raw strings, which insert newlines for you.
This is a simple attempt to mitigate this problem. If there is an
explicit newline character at the end of the selection, and then it
is immediately followed by the same newline character at the right end
of the selection, this following newline is removed. This way, one can
express a cursor at the end of a line explicitly.
* helix-term: send the STOP signal to all processes in the process group
From kill(3p):
If pid is 0, sig shall be sent to all processes (excluding an unspecified set
of system processes) whose process group ID is equal to the process group ID
of the sender, and for which the process has permission to send a signal.
This fixes the issue of running `git commit`, attempting to suspend
helix with ^Z, and then not regaining control over the terminal and
having to press ^Z again.
* helix-term: use libc directly to send STOP signal
* helix-term: document safety of libc::kill
* helix-term: properly handle libc::kill's failure
I misread the manpage for POSIX `kill` -- it returns `-1` in
the failure case, and sets `errno`, which is retrieved via
`std::io::Error::last_os_error()`, has its string representation printed
out, and then exits with the matching status code (or 1 if, for whatever
reason, there is no matching status code).
* helix-term: expand upon why we need to SIGSTOP the entire process group
Also add a link back to one of the upstream issues.
* misc: missing inline, outdated link
* doc: Add new theme keys and config option to book
* fix: don't panic in Tree::try_get(view_id)
Necessary for later, where we could be receiving an LSP response
for a closed window, in which case we don't want to crash while
checking for its existence
* fix: reset idle timer on all mouse events
* refacto: Introduce Overlay::new and InlineAnnotation::new
* refacto: extract make_job_callback from Context::callback
* feat: add LSP display_inlay_hint option to config
* feat: communicate inlay hints support capabilities of helix to LSP server
* feat: Add function to request range of inlay hint from LSP
* feat: Save inlay hints in document, per view
* feat: Update inlay hints on document changes
* feat: Compute inlay hints on idle timeout
* nit: Add todo's about inlay hints for later
* fix: compute text annotations for current view in view.rs, not document.rs
* doc: Improve Document::text_annotations() description
* nit: getters don't use 'get_' in front
* fix: Drop inlay hints annotations on config refresh if necessary
* fix: padding theming for LSP inlay hints
* fix: tracking of outdated inlay hints should not be dependant on document revision (because of undos and such)
* fix: follow LSP spec and don't highlight padding as virtual text
* config: add some LSP inlay hint configs
Multicursor completions may overlap and therefore overlapping
completions must be dropped to avoid crashes. Furthermore, multicursor
edits might simply be out of range if the word before/after the cursor
is shorter. This currently leads to crashes, instead these selections
are now also removed for completions.
This commit also significantly refactors snippet transaction generation
so that tabstops behave correctly with the above rules. Furthermore,
snippet tabstops need to be carefully mapped to ensure their position
is correct and consistent with our selection semantics. Finally,
we now keep a partially updated Rope while creating snippet
transactions so that we can fill information into snippets that
depends on the position in the document.
Most LSPs will complete case-insensitive matches, particularly from
lowercase to uppercase. In some cases, notably Pyright, this is given
as a simple insert text instead of TextEdit. When this happens, the
prefix text was left unedited.
* Generalised to multiple runtime directories with priorities
This is an implementation for #3346.
Previously, one of the following runtime directories were used:
1. `$HELIX_RUNTIME`
2. sibling directory to `$CARGO_MANIFEST_DIR`
3. subdirectory of user config directory
4. subdirectory of path to helix executable
The first directory provided / found to exist in this order was used as a
root for all runtime file searches (grammars, themes, queries).
This change lowers the priority of `$HELIX_RUNTIME` so that the user
config runtime has higher priority. More significantly, all of these
directories are now searched for runtime files, enabling a user to override
default or system-level runtime files. If the same file name appears
in multiple runtime directories, the following priority is now used:
1. sibling directory to `$CARGO_MANIFEST_DIR`
2. subdirectory of user config directory
3. `$HELIX_RUNTIME`
4. subdirectory of path to helix executable
One exception to this rule is that a user can have a `themes`
directory directly in the user config directory that has higher piority
to `themes` directories in runtime directories. That behaviour has been
preserved.
As part of implementing this feature `theme::Loader` was simplified
and the cycle detection logic of the theme inheritance was improved to
cover more cases and to be more explicit.
* Removed AsRef usage to avoid binary growth
* Health displaying ;-separated runtime dirs
* Changed HELIX_RUNTIME build from src instructions
* Updated doc for more detail on runtime directories
* Improved health symlink printing and theme cycle errors
The health display of runtime symlinks now prints both ends of the
link.
Separate errors are given when theme file is not found and when the
only theme file found would form an inheritence cycle.
* Satisfied clippy on passing Path
* Clarified highest priority runtime directory purpose
* Further clarified multiple runtime details in book
Also gave markdown headings to subsections.
Fixed a error with table indentation not building
table that also appears present on master.
---------
Co-authored-by: Paul Scott <paul.scott@anu.edu.au>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Fix#6092
Cause were some incorrect assumptions that missed an edge case in the
`Selection.contains()` calculation. Tests were added accordingly.
* Fix Selection.contains() edge-case handling.
Removing the len check short-circuit was the only thing needed as
pointed out by @dead10ck.
Repeating completions currently crates a savepoint when a completion
popup was triggered (so after the request completed). Just like for
normal completions the savepoint must be created at the request.
The occurrence of the completion request was previously not saved in
`last_insert`. To that end a new `InsertEvent::RequestCompletion`
variant has been added. When replayed this event creates a snapshot
that is "actived" by the `TriggerCompletion` event and subsequently
used during any `InsertEvent::CompletiuonApply` events.
