* Generalised to multiple runtime directories with priorities
This is an implementation for #3346.
Previously, one of the following runtime directories were used:
1. `$HELIX_RUNTIME`
2. sibling directory to `$CARGO_MANIFEST_DIR`
3. subdirectory of user config directory
4. subdirectory of path to helix executable
The first directory provided / found to exist in this order was used as a
root for all runtime file searches (grammars, themes, queries).
This change lowers the priority of `$HELIX_RUNTIME` so that the user
config runtime has higher priority. More significantly, all of these
directories are now searched for runtime files, enabling a user to override
default or system-level runtime files. If the same file name appears
in multiple runtime directories, the following priority is now used:
1. sibling directory to `$CARGO_MANIFEST_DIR`
2. subdirectory of user config directory
3. `$HELIX_RUNTIME`
4. subdirectory of path to helix executable
One exception to this rule is that a user can have a `themes`
directory directly in the user config directory that has higher piority
to `themes` directories in runtime directories. That behaviour has been
preserved.
As part of implementing this feature `theme::Loader` was simplified
and the cycle detection logic of the theme inheritance was improved to
cover more cases and to be more explicit.
* Removed AsRef usage to avoid binary growth
* Health displaying ;-separated runtime dirs
* Changed HELIX_RUNTIME build from src instructions
* Updated doc for more detail on runtime directories
* Improved health symlink printing and theme cycle errors
The health display of runtime symlinks now prints both ends of the
link.
Separate errors are given when theme file is not found and when the
only theme file found would form an inheritence cycle.
* Satisfied clippy on passing Path
* Clarified highest priority runtime directory purpose
* Further clarified multiple runtime details in book
Also gave markdown headings to subsections.
Fixed a error with table indentation not building
table that also appears present on master.
---------
Co-authored-by: Paul Scott <paul.scott@anu.edu.au>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Completion requests are computed asynchronously to avoid common micro
freezes while editing. This means that once a completion request
completes, the state of the editor might have changed. Currently,
there is a check to ensure we are still in insert mode. However,
we also need to ensure that the view and document hasn't changed
to avoid accidentally using a savepoint with the wrong view/document.
Furthermore, the editor might request a new completion while the
previous completion request hasn't complemented yet. This can
lead to weird flickering or an outdated completion request replacing
a newer completion that has already completed (the LSP server
is not required to process completion requests in order). This change
also needed to ensure determinism/linear ordering so that completion
popup always correspond to the last completion request.
Fixing autocomplete required moving the document savepoint before the
asynchronous completion request. However, this in turn causes new bugs:
If the completion popup is open, the savepoint is restored when the
popup closes (or another entry is selected). However, at that point
a new completion request might already have been created which
would have replaced the new savepoint (therefore leading to incorrectly
applied complies).
This commit fixes that bug by allowing in arbitrary number of
savepoints to be tracked on the document. The savepoints are reference
counted and therefore remain valid as long as any reference to them
remains. Weak reference are stored on the document and any reference
that can not be upgraded anymore (hence no strong reference remain)
are automatically discarded.
Currently, the selection is not saved/restored when completion
checkpoints are applied. This is usually fine because undoing changes
usually restores maps selections back in insert mode. But this is not
always the case and especially problematic in the presence of
multi-cursor completions (since completions are applied relative to
the selection/cursor) and snippets (which can change the selection)
* use max_line_width + 1 during softwrap to account for newline char
Helix softwrap implementation always wraps lines so that the newline
character doesn't get cut off so he line wraps one chars earlier then
in other editors. This is necessary, because newline chars are always
selecatble in helix and must never be hidden.
However That means that `max_line_width` currently wraps one char
earlier than expected. The typical definition of line width does not
include the newline character and other helix commands like `:reflow`
also don't count the newline character here.
This commit makes softwrap use `max_line_width + 1` instead of
`max_line_width` to correct the impedance missmatch.
* fix typos
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
* Add text-width to config.toml
* text-width: update setting documentation
* rename leftover config item
* remove leftover max-line-length occurrences
* Make `text-width` optional in editor config
When it was only used for `:reflow` it made sense to have a default
value set to `80`, but now that soft-wrapping uses this setting, keeping
a default set to `80` would make soft-wrapping behave more aggressively.
* Allow softwrapping to ignore `text-width`
Softwrapping wraps by default to the viewport width or a configured
`text-width` (whichever's smaller). In some cases we only want to set
`text-width` to use for hard-wrapping and let longer lines flow if they
have enough space. This setting allows that.
* Revert "Make `text-width` optional in editor config"
This reverts commit b247d526d6.
* soft-wrap: allow per-language overrides
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/languages.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
---------
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
Co-authored-by: Alex Boehm <alexb@ozrunways.com>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Do not add intermediate lines to jumplist with :<linenum> command.
* Revert jumplist index changes.
* Reduce calculations during update cycle.
* Use jumplist for undo, set jumplist before preview.
* remove some debug logging
* Revert "remove some debug logging"
This reverts commit 5772c4327e.
* Revert "Use jumplist for undo, set jumplist before preview."
This reverts commit f73a1b2982.
* Add last_selection, update implementation.
* @pascalkuthe initial feedback
* Ensure ":goto 123" keybinding works as expected.
* fix clippies, prefer expect() for expect last_selection state
* Fix lack of space for popup crash
* Fix saturating -> wrapping
* Fix wrapping -> saturating (I am an idiot)
* Remove useless "mut" in helix-tui/src/buffer.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Remove redundant bound-check
* Return bound-check back
* Add bound-check for set_style
* Remove set_style bound-check
* Revert bound-check
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Fixes a regression introduced in #5420 where a scrolloff of `x - 1`
was used instead if `x` at the bottom of the screen. This was
especially problematic if the scrolloff was set to `0` in that case
the scrolloff behaved as tough set to `-1` and the cursor disappeared
from the view if scrolled to the botoom.
Send a `Disconnect` DAP request if the `Terminated` event is received.
According to the specification, if the debugging session was started by
as `launch`, the debuggee should be terminated alongside the session. If
instead the session was started as `attach`, it should not be disposed of.
This default behaviour can be overriden if the `supportTerminateDebuggee`
capability is supported by the adapter, through the `Disconnect` request
`terminateDebuggee` argument, as described in
[the specification][discon-spec].
This also implies saving the starting command for a debug sessions, in
order to decide which behaviour should be used, as well as validating the
capabilities of the adapter, in order to decide what the disconnect should
do.
An additional change made is handling of the `Exited` event, showing a
message if the exit code is different than `0`, for the user to be aware
off the termination failure.
[discon-spec]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_DisconnectCloses: #4674
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
`:write` and other file-saving commands now check the file modification
time before writing to protect against overwriting external changes.
Co-authored-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Co-authored-by: LeoniePhiline <22329650+LeoniePhiline@users.noreply.github.com>
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* hide duplicate symlinks from the picker
* Apply suggestions from code review
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
* minor stylistic fix
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The `From<Value>` implementation for `Theme` converted the Value to a
string and re-parsed the string to convert it to
`HashMap<String, Value>` which feels a bit wasteful. This change uses
the underlying `toml::map::Map` directly when the value is a table and
warns about the unexpected `Value` shape otherwise.
This is necessary because toml 0.6.0 changes the Display implementation
for Value::Table so that the `to_string` no longer encodes the value as
a Document, just a Value. So the parse of the Value fails to be decoded
as a HashMap.
The behavior for returning `Default::default` matches the previous
code's behavior except that it did not warn when the input Value was
failed to parse.
`toml::from_slice` has been removed. The CHANGELOG recommends using
`toml::from_str` instead and doing the byte-to-str conversion yourself.
The `toml::toml!` macro has also changed to return the type of the
value declared within the macro body. In the change in
`helix-view/src/theme.rs` this is a `toml::map::Map` (it was a
`toml::Value` previously) allowing us to skip the match and use the
map directly.
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
The error messages for a theme that failed to be deserialized (or
otherwise failed to load) were covered up by the context/with_context
calls:
* The log message for a bad theme configured in config.toml would only
say "Failed to deserilaize theme"
* Selecting a bad theme via :theme would show "Theme does not exist"
With these changes, we let the TOML deserializer errors bubble up, so
the error messages can now say the line number of a duplicated
key - and that key's name - when a theme fails to load because of a
duplicated key.
Providing a theme which does not exist to :theme still gives a helpful
error message: "No such file or directory."
* Reset mode when changing buffers
This is similar to the change in
e4c9d4082a: reset the editor to normal
mode when changing buffers. Usually the editor is already in normal
mode but it's possible to setup insert-mode keybindings that change
buffers.
* Move normal mode entering code to Editor
This should be called internally in the Editor when changing documents
(Editor::switch) or changing focuses (Editor::focus).
* Add `View::ensure_cursor_in_view_center` to adjust view after searching and jumping
Also `offset_coodrs_to_in_view` was refactored to reduce duplicated position calculations.
* Fix a wrong offset calculation in `offset_coords_to_in_view_center`
It ignored `scrolloff` if `centering` is false.
* Show (git) diff signs in gutter (#3890)
Avoid string allocation when git diffing
Incrementally diff using changesets
refactor diffs to be provider indepndent and improve git implementation
remove dependency on zlib-ng
switch to asynchronus diffing with similar
Update helix-vcs/Cargo.toml
fix toml formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
fix typo in documentation
use ropey reexpors from helix-core
fix crash when creating new file
remove useless use if io::Cursor
fix spelling mistakes
implement suggested improvement to repository loading
improve git test isolation
remove lefover comments
Co-authored-by: univerz <univerz@fu-solution.com>
fixed spelling mistake
minor cosmetic changes
fix: set self.differ to None if decoding the diff_base fails
fixup formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
reload diff_base when file is reloaded from disk
switch to imara-diff
Fixup formatting
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Redraw buffer whenever a diff is updated.
Only store hunks instead of changes for individual lines to easily allow
jumping between them
Update to latest gitoxide version
Change default diff gutter position
Only update gutter after timeout
* update diff gutter synchronously, with a timeout
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* address review comments and ensure lock is always aquired
* remove configuration for redraw timeout
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Media keys are sent despite `DISAMBIGUATE_ESCAPE_CODES` being unset.
Previously we panicked on these. This change translates the
disambiguated keys from crossterm so that they do not cause a panic.
Previously we removed selections for a closed view on only the
currently focused document. A view might have selections in other
documents though, so the view needs to be removed from all documents.
* Add a test case for updating jumplists across windows
* Apply transactions to all views on history changes
This ensures that jumplist selections follow changes in documents, even
when there are multiple views (for example a split where both windows
edit the same document).
* Leave TODOs for cleaning up View::apply
* Use Iterator::reduce to compose history transactions
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Previously, jumplists could grow unchecked. Every transaction is
applied to jumplist selections to ensure that they are up to date
and within document bounds, so this would cause every edit to become
more expensive as jumplist lengths increased throughout a session.
Setting a maximum number of entries limits the cost.
Vim and Neovim limit their jumplists:
* b298fe6cba/src/structs.h (L141)
* e8cc489acc/src/nvim/mark_defs.h (L57)
Notably, Kakoune does not. In Kakoune, changes are applied to jumplist
entries lazily as you hit `<C-o>`/`<C-i>` though, so Kakoune doesn't
have the same growing cost concerns. Kakoune also does not have a
concept of a View which limits the cost further.
Vim and Neovim limit to 100. This seems unreasonably high to me so I've
set this to 30 to start. We can increase if this is problematically
low.
There is some common code between Editor::focus_next and Editor::focus
that can be eliminated by refactoring Tree::focus_next into a function
that only returns the next ViewId.
* dynamically resize line number gutter width
* removing digits lower-bound, permitting spacer
* removing max line num char limit; adding notes; qualified successors; notes
* updating tests to use new line number width when testing views
* linenr width based on document line count
* using min width of 2 so line numbers relative is useful
* lint rolling; removing unnecessary type parameter lifetime
* merge change resolution
* reformat code
* rename row_styler to style; add int_log resource
* adding spacer to gutters default; updating book config entry
* adding view.inner_height(), swap for loop for iterator
* reverting change of current! to view! now that doc is not needed
* Clamp highlighting range to be within document
This fixes a panic possible when two vsplits of the same document
exist and enough lines are deleted from the document so that one of
the windows focuses past the end of the document.
* Ensure cursor is in view on window change
If two windows are editing the same document, one may delete enough of
the document so that the other window is pointing at a blank page (past
the document end). In this change we ensure that the cursor is within
view whenever we switch to a new window (for example with `<C-w>w`).
* Update helix-term/src/ui/editor.rs
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Most commands that accept an argument show their current value if no
argument is specified. The `:theme` command previously displayed an
error message in the status bar if not provided with an argument:
```
Theme name not provided
```
It now shows the current theme name in the status bar if no argument is
specified.
Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
* Autosave all when the terminal loses focus
* Correct comment on focus config
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Need a block_try_flush_writes in all quit_all paths
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Fix test::print for Unicode
The print function was not generating correct translations when
the input has Unicode (non-ASCII) in it. This is due to its use of
String::len, which gives the length in bytes, not chars.
* Fix multi-code point auto pairs
The current code for auto pairs is counting offsets by summing the
length of the open and closing chars with char::len_utf8. Unfortunately,
this gives back bytes, and the offset needs to be in chars.
Additionally, it was discovered that there was a preexisting bug where
the selection was not computed correctly in the case that the cursor
was:
1. a single grapheme in width
2. this grapheme was more than one char
3. the direction of the cursor is backwards
4. a secondary range
In this case, the offset was not being added into the anchor. This was
fixed.
* migrate auto pairs tests to integration
* review comments
This was not distinguishing the error types when trying a receive on an empty
receiver, which was erroneously causing the sender to be closed when trying to
flush the writes when there were none
If a document is written with a new path, currently, in the event that
the write fails, the document still gets its path changed. This fixes
it so that the path is not updated unless the write succeeds.
The way that document writes are handled are by submitting them to the
async job pool, which are all executed opportunistically out of order. It
was discovered that this can lead to write inconsistencies when there
are multiple writes to the same file in quick succession.
This seeks to fix this problem by removing document writes from the
general pool of jobs and into its own specialized event. Now when a
user submits a write with one of the write commands, a request is simply
queued up in a new mpsc channel that each Document makes to handle its own
writes. This way, if multiple writes are submitted on the same document,
they are executed in order, while still allowing concurrent writes for
different documents.
Undo/redo/earlier/later call `Document::apply_impl` which applies
transactions to the document. These transactions also need to be
applied to the view as in 0aedef0.
It is easy to forget to call `Document::apply` and/or `View::apply` in
the correct order. This commit introduces a helper function which
closes over both calls.
This change adds View::apply calls for all Document::apply call-sites,
ensuring that changes to a document do not leave invalid entries in
the View's jumplist.
Applying a transaction to a View adjusts the ranges in the jumplist
to ensure that they remain within the text of the document and follow
regular selection invariants (for example, must be have a width of at
least one).
* Implement cursorcolumn
* Add documentation
* Separate column style from line with fallback
* Fallback to cursorcolumn first
* Switch to non-fallback try_get_exact
Add new function `try_get_exact`, which doesn't perform fallback,
and use that instead because the fallback behaviour is being handled
manually.
This change automatically tracks pending text for for commands which use
on-next-key callbacks. For example, `t` will await the next key event
and "t" will be shown in the bottom right-hand corner to show that we're
in a pending state.
Previously, the text for these on-next-key commands needed to be
hard-coded into the command definition which had some drawbacks:
* It was easy to forget to write and clear the pending text.
* If a command was remapped in a custom config, the pending text would
still show the old key.
With this change, pending text is automatically tracked based on the
key events that lead to the command being executed. This works even
when the command is remapped in config and when the on-next-key
callback is nested under some key sequence (for example `mi`).
* Change focus to modified docs on quit
When quitting with modified documents, automatically switch focus to
one of them.
* Update helix-term/src/commands/typed.rs
Co-authored-by: Poliorcetics <poliorcetics@users.noreply.github.com>
* Make it work with buffer-close-all and the like
* Cleanup
Use Cow instead of String, and rename DoesntExist -> DoesNotExist
Co-authored-by: Poliorcetics <poliorcetics@users.noreply.github.com>
* Add option to skip the first indent guide
* reorder skip_first option
* change indent-guides.skip_first to a number
* rename skip -> skip_levels
* add skip_levels to the book
* Update book/src/configuration.md
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
* Update helix-term/src/ui/editor.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Co-authored-by: Robin <robinvandijk@klippa.com>
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add RawTheme to handle inheritance with theme palette
* Add a intermediate step in theme loading
it uses RawTheme struct to load the original ThemePalette, so we can merge it with the inherited one.
* Load default themes via RawThemes, remove Theme deserialization
* Allow naming custom theme same as inherited one
* Remove RawTheme and use toml::Value directly
* Resolve all review changes resulting in a cleaner code
* Simplify return for Loader::load
* Add implementation to avoid extra step for loading of base themes
Underline styles are mutally exclusive and overwrite each other.
Therefore implementing as an modifier lead to incorrect behaviour
when the underline style is overwritten.
For backwards compatability the "underline" modified is retained (but
deprecated). Instead the "underline_style" and "underline_color"
optios should be used to style underlines.
Applying document-change transactions to diagnostic ranges is not stable
with respect to the ordering of diagnostics. This can cause diagnostics
to become temporarily unordered with some edits to a document, which can
eventually break some invariants/assumptions in syntax::merge.
With this change, Document::diagnostics are always sorted.
Currently it is not possible to save a file with a language that
has an external formatter configuration unless the external
formatter is installed, even if the language has a Language Server
configuration capable of auto-format. This change checks that the
external formatter exists before using it to create a formatting
callback.
* Derive Document language name from `languages.toml` `name` key
This changes switches from deriving the language name from the
`languages.toml` `scope` key to `name` (`language_id` in the
`LanguageConfiguration` type). For the most part it works to derive the
language name from scope by chopping off `source.` or `rsplit_once` on
`.` but for some languages we have now like html (`text.html.basic`),
it doesn't. This also should be a more accurate fallback for the
`language_id` method which is used in LSP and currently uses the
`rsplit_once` strategy.
Here we expose the language's name as `language_name` on `Document` and
replace ad-hoc calculations of the language name with the new method.
This is most impactful for the `file-type` statusline element which is
using `language_id`.
* Use `Document::language_name` for the `file-type` statusline element
The `file-type` indicator element in the statusline was using
`Document::language_id` which is meant to be used to for telling
Language Servers what language we're using. That works for languages
with `language-server` configurations in `languages.toml` but shows
text otherwise. The new `Document::language_name` method from the
parent commit is a more accurate way to determine the language.
Ported over from 61365dfbf3 in the `gui` branch. This will allow
adding our own events, most notably an idle timer event (useful
for adding debounced input in [dynamic pickers][1] used by interactive
global search and workspace symbols).
[1]: https://github.com/helix-editor/helix/pull/3110
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Change default formatter for any language
* Fix clippy error
* Close stdin for Stdio formatters
* Better indentation and pattern matching
* Return Result<Option<...>> for fn format instead of Option
* Remove unwrap for stdin
* Handle FormatterErrors instead of Result<Option<...>>
* Use Transaction instead of LspFormatting
* Use Transaction directly in Document::format
* Perform stdin type formatting asynchronously
* Rename formatter.type values to kebab-case
* Debug format for displaying io::ErrorKind (msrv fix)
* Solve conflict?
* Use only stdio type formatters
* Remove FormatterType enum
* Remove old comment
* Check if the formatter exited correctly
* Add formatter configuration to the book
* Avoid allocations when writing to stdin and formatting errors
* Remove unused import
Co-authored-by: Gokul Soumya <gokulps15@gmail.com>
* add statusline element to display file line endings
* run cargo fmt --all
* change the word *ending* from plural to singular
* support for the unicode-lines feature flag
* Add lsp signature help
* Do not move signature help popup on multiple triggers
* Highlight current parameter in signature help
* Auto close signature help
* Position signature help above to not block completion
* Update signature help on backspace/insert mode delete
* Add lsp.auto-signature-help config option
* Add serde default annotation for LspConfig
* Show LSP inactive message only if signature help is invoked manually
* Do not assume valid signature help response from LSP
Malformed LSP responses are common, and these should not crash the
editor.
* Check signature help capability before sending request
* Reuse Open enum for PositionBias in popup
* Close signature popup and exit insert mode on escape
* Add config to control signature help docs display
* Use new Margin api in signature help
* Invoke signature help on changing to insert mode
* feat(statusline): add the file type (language id) to the status line
* refactor(statusline): move the statusline implementation into an own struct
* refactor(statusline): split the statusline implementation into different functions
* refactor(statusline): Append elements using a consistent API
This is a preparation for the configurability which is about to be
implemented.
* refactor(statusline): implement render_diagnostics()
This avoid cluttering the render() function and will simplify
configurability.
* feat(statusline): make the status line configurable
* refactor(statusline): make clippy happy
* refactor(statusline): avoid intermediate StatusLineObject
Use a more functional approach to obtain render functions and write to
the buffers, and avoid an intermediate StatusLineElement object.
* fix(statusline): avoid rendering the left elements twice
* refactor(statusline): make clippy happy again
* refactor(statusline): rename `buffer` into `parts`
* refactor(statusline): ensure the match is exhaustive
* fix(statusline): avoid an overflow when calculating the maximal center width
* chore(statusline): Describe the statusline configurability in the book
* chore(statusline): Correct and add documentation
* refactor(statusline): refactor some code following the code review
Avoid very small helper functions for the diagnositcs and inline them
instead.
Rename the config field `status_line` to `statusline` to remain
consistent with `bufferline`.
* chore(statusline): adjust documentation following the config field refactoring
* revert(statusline): revert regression introduced by c0a1870
* chore(statusline): slight adjustment in the configuration documentation
* feat(statusline): integrate changes from #2676 after rebasing
* refactor(statusline): remove the StatusLine struct
Because none of the functions need `Self` and all of them are in an own
file, there is no explicit need for the struct.
* fix(statusline): restore the configurability of color modes
The configuration was ignored after reintegrating the changes of #2676
in 8d28f95.
* fix(statusline): remove the spinner padding
* refactor(statusline): remove unnecessary format!()
* Add mode specific styles
In similar vein to neovim's lualine and similar statusline packages this
allows helix users to style their mode based on which mode it is thus
making each mode more visually distinct at a glance
* Add an example based on rosepine
* Add editor.colors-mode config
* Document statusline mode styles
* Add workspace and document diagnostics picker
fixes#1891
* Fix some of @archseer's annotations
* Add From<&Spans> impl for String
* More descriptive parameter names.
* Adding From<Cow<str>> impls for Span and Spans
* Add new keymap entries to docs
* Avoid some clones
* Fix api change
* Update helix-term/src/application.rs
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
* Fix a clippy hint
* Sort diagnostics first by URL and then by severity.
* Sort diagnostics first by URL and then by severity.
* Ignore missing lsp severity entries
* Add truncated filepath
* Typo
* Strip cwd from paths and use url-path without schema
* Make tests a doctest
* Better variable names
Co-authored-by: Falco Hirschenberger <falco.hirschenberger@itwm.fraunhofer.de>
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
The command palette previously used + as a delimiter for denoting
a single key in a key sequence, (like C+w). This was at odds with
how the statusline displayed them with pending keys (like <C-w>).
This patch changes the palette formatting to the statusline formatting
* feat: make `move_vertically` aware of tabs and wide characters
* refactor: replace unnecessary checked_sub with comparison
* refactor: leave pos_at_coords unchanged and introduce separate pos_at_visual_coords
* style: include comment to explain `pos_at_visual_coords` breaking condition
* refactor: use `pos_at_visual_coords` in `text_pos_at_screen_coords`
* feat: make `copy_selection_on_line` aware of wide characters
* Display highest severity diagnostic in gutter
* Improve gutter diagnostic performance
Very slight improvement (doesn't really make a difference), iterates over the diagnostics of the line
once instead of twice.
* Add comment justifying unwrap
When a new View of a Document is created, a default cursor of 0, 0 is
created, and it does not get normalized to a single width cursor until
at least one movement of the cursor happens. This appears to have no
practical negative effect that I could find, but it makes tests difficult
to work with, since the initial selection is not what you expect it to be.
This changes the initial selection of a new View to be the width of the
first grapheme in the text.
* Use new macro syntax for encoding sequences of keys
* Make convenience helpers for common test pattern
* Use indoc for inline indented raw strings
* Add feature flag for integration testing to disable rendering
- Add file-picker.follow-symlinks configuration option (default is true), this
also controls if filename and directory completers follow symlinks.
- Update FilePicker to set editor error if opening a file fails, instead of
panicing.
Fix#1548Fix#2246
* allows passing extra formatting options to LSPs
- adds optional field 'format' to [[language]] sections in 'languages.toml'
- passes specified options the LSPs via FormattingOptions
* cleaner conversion of formatting properties
* move formatting options inside lsp::Client
* cleans up formatting properties merge
In certain circumstances it was possible to get into an infinite loop
when replaying macros such as when different macros attempt to replay
each other.
This commit adds changes to track which macros are currently being
replayed and prevent getting into infinite loops.
* Fix panic on close last buffer (#2367)
In certain circumstances it was possible to cause a panic when closing
buffers due to some mishandling of view document history.
A change has been made to delete removed documents from the history of
accessed documents for each view. The ensures we don't attempt to jump
to a deleted document by mistake.
* Move remove document code into View function 'remove_document'
* Replace 'view.jumps.remove' call with 'view.remove_document' call
This line uses the Display trait for io::ErrorKind which was
stabilized in Rust 1.60.0. We can set MSRV all the way back to
1.57.0 by replacing it with a pretty-print.
Closes#2460.
* add Tree::swap_split_in_direction()
* add swap_view_{left,down,up,right} commands, bound to H,J,K,L
respectively in the Window menu(s)
* add test for view swapping
Change the layout of existing split view from horizontal to vertical and
vica-versa. It only effects the focused view and its siblings, i.e. not
recursive.
Command is mapped to 't' or 'C-t' under the Window menus.
Inserting these with the `HashMap::insert` method evades the call
to `Selection::ensure_invariants`. The effect is that the scratch
buffer (or other buffers opened through these code-paths) can start
with a selection at (0, 0), when a file with equivalent contents ("\n")
would start with (0, 1).
I.e.:
hx
and
touch f
hx f
start with different selections even though they have an equivalent
Rope. With this change they both start with (0, 1).
* feat(commands): better handling of buffer-close
Previously, when closing buffer, you would loose cursor position in other docs.
Also, all splits where the buffer was open would be closed.
This PR changes the behavior, if the view has also other buffer
previously viewed it switches back to the last one instead of the view
being closed. As a side effect, since the views are persisted,
the cursor history is persisted as well.
Fixes: https://github.com/helix-editor/helix/issues/1186
* Adjust buffer close behavior
* Remove closed documents from jump history
* Fix after rebase
* Make `:write` create nonexistent subdirectories
Prompting as to whether this should take place remains a TODO.
* Move subdirectory creation to new `w!` command
* Add runtime language configuration (#1794)
* Add set-language typable command to change the language of current buffer.
* Add completer for available language options.
* Update set-language to refresh language server as well
* Add language id based config lookup on `syntax::Loader`.
* Add `Document::set_language3` to set programming language based on language
id.
* Update `Editor::refresh_language_server` to try language detection only if
language is not already set.
* Remove language detection from Editor::refresh_language_server
* Move document language detection to where the scratch buffer is saved.
* Rename Document::set_language3 to Document::set_language_by_language_id.
* Remove unnecessary clone in completers::language
* feat(clipboard): reintroduce win32yank for wsl2 linux
* refactor(clipboard): adjust win32yank position to not interrupt wayland/x11
Co-authored-by: jiqb <gthbji@ml1.net>
* Move top level lsp config to editor.lsp
This is mainly done to accomodate the new lsp.signature-help config
option that will be introduced in https://github.com/helix-editor/helix/pull/1755
which will have to be accessed by commands. The top level config
struct is split and moved to different places, making the relocation
necessary
* Revert rebase slipup
* add basic completion replay
* use transaction as the last completion
* completion replay only on trigger position
* cache changes in CompletionAction
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Show infobox to hint textobjects with `mi` and `ma`
* Add note to infobox than any pair of characters will work too
The wording could probably be a little more clear, but I wanted to
keep it short but still accurate.
* Don't allocate a vec for the static help text
* Fix bug where `mi<esc>` would swallow next input and persist infobox
* Better help text for arbitrary pair matching in textobject selection
* Add way to add fake pending key data below status, use with `mi`/`ma`
This is a bit hacky as it makes use of global state which will end
up managed in multiple places, but has precedent in the way autoinfo
works. There should probably be a bigger refactor to handle this
kind of state better.
* Return early on anything other than `mi` and `ma` for autoinfo
* Remove "ascii" from help text with `mi` and `ma`
* Update helix-term/src/ui/editor.rs
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* impl auto pairs config
Implements configuration for which pairs of tokens get auto completed.
In order to help with this, the logic for when *not* to auto complete
has been generalized from a specific hardcoded list of characters to
simply testing if the next/prev char is alphanumeric.
It is possible to configure a global list of pairs as well as at the
language level. The language config will take precedence over the
global config.
* rename AutoPair -> Pair
* clean up insert_char command
* remove Rc
* remove some explicit cloning with another impl
* fix lint
* review comments
* global auto-pairs = false takes precedence over language settings
* make clippy happy
* print out editor config on startup
* move auto pairs accessor into Document
* rearrange auto pair doc comment
* use pattern in Froms
